DPSS 515nm Low Noise Laser
|
Specifications: |
||||
|
Model Number |
|
SDL-515-LN-XXXT |
||
|
Output Power @ 25 ℃ |
mW |
|||
|
Wavelength |
±nm |
|||
|
Spectral Bandwidth |
nm |
|||
|
Transverse Mode |
|
TEM00 |
||
|
Operation Mode |
|
CW |
||
|
Power Stability over 2 hours after Warm-up |
<5% (<1%, <3% optional) |
|||
|
Noise of Amplitude (RMS, 1~20MHz) |
<1% (<0.5% optional) |
|||
|
M2 factor |
/ |
|||
|
Beam Diameter at the Aperture |
mm |
|||
|
Beam Divergence (1/e2, Full Angle) |
|
mard |
||
|
Beam Outline |
|
/ |
||
|
Ellipticity |
|
/ |
||
|
Polarization Ratio |
|
/ |
||
|
Pointing Stability after Warm-up |
|
<0.05mrad |
||
|
Warm-up Time |
|
<10minutes |
||
|
Operating Temperature |
10℃～35℃ |
|||
|
Laser Head |
SDL-LH- |
SDL-LH- |
SDL-LH- |
|
|
Power Supply |
SDL-PS- |
SDL-LH- |
SDL-LH- |
|
|
Input voltage |
DC or 90-265VAC 50/60Hz |
|||
|
Modulation |
TTL Modulation >5KHz |
|||
|
Expect Life Time |
10000 hours |
|||
|
Warranty Time |
1 year |
|||
|
|
|
|
||
DPSS XXXX Low Noise Laser
|
Specifications: |
||||
|
Model Number |
|
SDL-LN |
||
|
Output Power @ 25 ℃ |
mW |
|||
|
Wavelength |
±nm |
|||
|
Spectral Bandwidth |
nm |
|||
|
Transverse Mode |
|
TEM00 |
||
|
Operation Mode |
|
CW |
||
|
Power Stability over 2 hours after Warm-up |
<5% (<1%, <3% optional) |
|||
|
Noise of Amplitude (RMS, 1~20MHz) |
<1% (<0.5% optional) |
|||
|
M2 factor |
/ |
|||
|
Beam Diameter at the Aperture |
mm |
|||
|
Beam Divergence (1/e2, Full Angle) |
|
mard |
||
|
Beam Outline |
|
/ |
||
|
Ellipticity |
|
/ |
||
|
Polarization Ratio |
|
/ |
||
|
Pointing Stability after Warm-up |
|
<0.05mrad |
||
|
Warm-up Time |
|
<10minutes |
||
|
Operating Temperature |
10℃～35℃ |
|||
|
Laser Head |
SDL-LH- |
SDL-LH- |
SDL-LH- |
|
|
Power Supply |
SDL-PS- |
SDL-LH- |
SDL-LH- |
|
|
Input voltage |
DC or 90-265VAC 50/60Hz |
|||
|
Modulation |
TTL Modulation >5KHz |
|||
|
Expect Life Time |
10000 hours |
|||
|
Warranty Time |
1 year |
|||
|
|
|
|
||
* Power Supply Option
|
|
|
|
|
SDL-PS-300 |
SDL-PS-500 |
SDL-PS-900 |
|
|
|
|
|
SDL-PS-400 |
SDL-PS-600 |
SDL-PS-800 |
* Detailed Laser Head and power supply info of each power version will be provided on request.
* 4 or 8 hours Longer operation period output power stability are available on request.
* Better (<3%,<1%) power stability are available on request.
* Other version Laser Head and power supply are available on request.
* Analog Modulation >2KHz or higher as option.
* Up to 30Khz TTL modulation on request.
* We do not suggest you using any electro-modulation on LN or SLM version laser, due to the modulation signal will effect the Noise of Amplitude.
* High frequency AOM modulation on requested.
* Line output version are available on request.
* Fiber coupled system is available on request.
* Longer warranty on request.
* Other custom-made design is available, please contact us for details.